? ? SECRET OF GREAT TASTE? ?? adderall xr 5 mg capsule extended release

It’s always focus on the taste first then the lifespan while talked about the atomization core, producer won’t test its life service if the atomization core cannot guarantee the taste.

The taste of atomization?core can not be evaluated by machine, but can only be puffed?manually. The secret of good taste comes from:

1. Heating plate
2. Oil-storage cotton
3. Atomizationcore structure

When adjusting e-cigarettes, R&D engineers need to find a [balance point] between the above three points and e-liquid.

1. [Selection of heating plate]

Different materials have different effects. The customized N406 alloy heating sheet selected for COTTONXof HCD is characterized by fast heat conduction and difficult carbon deposition.

2.[Design of heating plate]

includes thickness, material, length, width and circuit design. The requirements are very precise. Even if its length, width and thickness change by 0.01 mm, the taste will be greatly changed. Because the thickness affects the heat conduction (if the mesh is too wide, it will lead to heat dispersion), and the heat affects the evaporation speed, which in turn affects the taste.

3.[Oil storage cotton]

The material, density and winding method of oil storage cotton are very important factors. Cotton with high density has strong oil locking ability, which will slow down the oil guiding speed and lead to the risk of burning; On the contrary, the density is small, the oil guiding speed is fast, but it is easy to leak oil. The heating wire is six or seven hundred degrees after the power is turned on, if it is neutralized with e-liquid, the working temperature is only about 200 degrees. Therefore, the speed of oil intake will affect the service life and taste. Good cotton should have fast oil guiding speed, strong oil locking ability and high temperature resistance to avoiding easy burning the core.

4.[Atomization core structure]

Structure determines the speed of oil intake, COTTONX adopts the structure of oil intake all around.

[Balance point] There is no fixed answer. It can be said that empiricism is the highest in this field. Experienced engineers can adjust spontaneously according to the situation when puffing: Is the cotton piece?wrapped with a thick layer?to leading slow?oil intake?then?affecting?the aroma? Or, if the heating temperature of the heating piece?is not enough, how to adjust the wire diameter and resistance of the mesh?

Sometimes, the matching cotton sheet is not reasonable enough, so it is necessary to change the heating temperature of the mesh?plate?and bring up the fragrance; Sometimes, the oil feeding effect of cotton sheets is not good, and the density of mesh sheets needs to be adjusted. The key is to find the [balance point] between the oil inlet speed and the atomization speed. Adjusting cigarettes is like trying on clothes, you have to tailor it. Different e-liquid?has different consistency or formula, so engineers need to provide different solutions to meet the taste requirements of customers.

The taste is a very personal feeling. For the same taste, everyone has different evaluation in?its aroma, sweetness, humidity and reducibility. Customers come to the scene to adjust cigarettes. If the customer is not satisfied with the program provided, HCD?R&D engineers will keep trying all the time?until the customer is satisfied.?There was a time, the cooperation company has been more than ten years of old customers brought more than 20 kinds of e-liquid,?HCD engineers provided many different atomization?core solutions?and adjusting the product until three o’clock at night. The engineer said, “Our target?is to help?the customer to solve all matters?& concern come once”

? ? THE SERVICE LIFE OF ATOMIZATION CORE? ??

In terms of factors affecting the life of atomization core, regarding the external factors, e-liquid takes a?relatively large?account. The consistency and chemical impurities of e-liquid are related to the life of atomization?core?, which the?thicker and more impurities e-liquid?will take the greater workload of atomization?core, just like a person who overeats is not as healthy as a person who has a balanced diet.

Aside from external causes, the biggest threat to the life of the atomization?core is “carbon deposition”. Carbon deposition is the residue after atomized. It shows that the heating wire is black and has slurry. If there are too many atomized residues, the cotton core will be burnt and feel the bad smell. If the electronic atomizer works all the time, the temperature will always be around 200 degrees, and there will be basically no carbon deposition. However, in the later stage, there is little e-liquid?left, the oil feeding speed of the oil-storage cotton slows down, and the working voltage does not change, so?carbon deposits will be generated rapidly and in large quantities?with ?the temperature of the heating plate rising, which will endanger the life of the atomization?core. The principle of carbon deposition is similar to that of fried food, which can’t be fried at low temperature, but will be fried at high temperature.

Therefore, if you want to prolong the life of the atomization core, you’d better do it as follows: the atomization?core can ensure that the fragrance and sweetness can be extracted at low temperature, so that keep great taste until the later stage; Only at the end, insufficient?e-liquid leading to less oil intake with?the temperature still rising, so carbon deposition is still inevitable, but the impact will not be too great.

It has attracted?people’s attention?with a global market for more than?108 billion?USD?scale, someone might be curious about?how to make it?and?puff the smoke?

STRUCTURE

Smoke bomb, smoke rod, atomizer

Actually, as earlier in 2016, The New England Journal of Medicine introduced the structure and principle of e-cigarettes in its October issue of the Health Effects of Electronic Cigarettes: e-cigarettes are mainly composed of three parts:

cigarette cartridge (containing e-liquid?and mouthpiece), cigarette rod (containing battery) and the atomizer?which is the most important structure among them, its core component, the atomization?core, plays a key?transformation?role in process.

Take the latest R&D?achievement of HCD, COTTONX Atomization?Core, as an example. We are wondering that what kind of process has it gone through of this precision industrial product with a length of only 2.3 cm?will transform the e-liquid?into smoke and take an extraordinary experience?for user with its tiny body?

ATOMIZATION

[cigarette atomizing]

We should understand the “atomizing”?firstly if we?want to explore the mystery of atomization?core, Atomizing is?disperse liquid into tiny droplets or aerosols, which can be achieved by high temperature, high pressure or high-speed air flow.

Electronic atomizer takes the high temperature?method?to making the e-liquid into smoke, which is actually aerosol. Aerosol is suspended in the air?and?no longer maintaining?the original liquid form of the e-liquid, but a mixture of solid and liquid.

A study has proved that the main products of e-cigarette is propylene glycol, glycerol and nicotine, the sum of the three content in 80 ℃, 150 ℃, 250 ℃, 300 ℃, 500 ℃ and 900 ℃ atomizing?conditions accounted for 99.66%, 96.66%, 99.53%, 99.35%, 97.25% and 98.92% of the total,

which is basically no difference with the main components of the e-liquid. This means that the atomizing?process basically does not occur chemical reactions, it seems to be smoking “smoke”, in fact, the inhalation is still atomized liquid, does not contain the cracking products produced by traditional cigarette combustion.

EXAMPLE

Take COTTONX atomization core as an example

The workflow of e-cigarette can be briefly described as follows: user inhales → airflow sensor ?senses airflow, turns on battery → activates atomizer → the atomizer heats e-liquid, reaches boiling point, and atomizes it into “vapor”.

After we know?the vaping principle of e-cigarettes, let’s look at the real thing.

Atomizer inside working flow since puffing:

· E-liquid enters from the liquid guide hole in all directions at 360 degrees, and is evenly soaked with oil guide cotton sheets woven by long-staple cotton;

· High-precision heating wire imported from Sweden is inserted into the cotton piece and heats up within 0.01 seconds after being connected to the power supply.

· Sufficient e-liquidin cotton piece is heated rapidly and volatilized at high temperature to form smoke;

· The smoke is inhaled by the product through the air outlet, bringing fine, pure and highly reducible atomized molecules to users;

· When the temperature exceeds 260 degrees, the heating element automatically outputs a signal to the power supply then cut it off to avoid burning the core.

The working process of COTTONX seems in simple way, but in fact there are hidden secrets everywhere.

EXPECTATION

HCD Huachengda Helps the Development of Atomization Industry

The e-cigarette?industry is still in the process of rapid development, it is not only intermingled with the tobacco industry to produce such high-tech products as e-atomizer, but also can be applied to the field of health, atomizing?treatment, beauty etc.

HCD as rooted in the atomizing industry chain for 15?years, as a part of Chinese atomization enterprises with responsibility and mission, we have the confidence, professionalism and ability to promote the R&D and production in the field of atomization cores, achieve leapfrog progress in the e-atomizing?industry, and help the manufacturing supply chain in the field of e-atomizing?in China to maintain a vigorous innovation and core leadership.

How to avoid burning the core? How to extend the?service?life of atomization core ? How to highly restore the flavor of e-liquid ? ?Please waiting for next issue.

【1】Chitra Dinakar, M.D., and George T. O’Connor, M.D., 2016, The Health Effects of Electronic Cigarettes, The?New?England?Journal?of?Medicine, Vol.375, pp.1372-1381.

【2】王萍娟,黃忠輝,范忠,田兆福,梁俊,馮守愛,吳彥,陸漓, 2016, Py-GC/MS研究霧化溫度對電子煙油霧化主產物的影響, 《湖北農業科學》, Vol.15, pp.3988-3990.

In order to commend outstanding enterprises?that export their products overseas, popularize advanced experience and carry forward the export spirit of China’s e-cigarette industry, the conference held the first e-cigarette export outstanding enterprise——“Vape Valley Award”, in which hundreds of enterprises participated.

After rigorous and fair selection by the judging panel, Shenzhen Huachengda Precision Industry Co., Ltd. won the “Vape Valley Award?·?Supply Chain Excellent Enterprise ”?with?its strength of focusing on atomization?cores for 14 years. The award aims to commend enterprises in the supply chain of electronic atomizers who have made positive contributions to product development, innovation and export.

Chen Ping, CEO of HCD, shared the company’s world-leading atomizing technology at the conference, and grandly released the micro-molecule atomizing?technology brands——“Jinwu”?and the new atomization core “COTTONX Future Cotton Core”.

The global e-cigarette market has exceeded 100 billion dollars, and Chinese manufacture has been?one of the most recognized labels in the world. In the future, Chen Ping hopes to make HCD?be?a global R&D and manufacturing base of atomization?core through technology and brand. At the same time, with the corporate mission of “Making?a healthy and pure atomization core, healthy atomizing?and life?happily”, HCD?will take?a better atomization experience?for consumer.

Focusing on atomization core for 14 years

Accumulated global sales of atomization cores exceeded 10 billion pieces.

HCD, as a leader?of atomization core, has an annual production capacity of more than 2 billion atomization cores and more than 300 independent patents . Thanks to the support?of technology and the scale of production, its?products have reached more than 100 countries and regions all over the world, serving more than 500 electronic atomizer customers, it’s supplying atomization components to the four major international tobacco companies?directly or indirectly , and the top ten brands in the domestic industry and thousands of small and medium-sized e-cigarette customers. At present, HCD has supplied more than 10 billion atomization cores around the world.

Since pioneered the first inlaid?ceramic core in 2019, HCD atomizing-tech?brands has?made?a significant influence?on the atomization field. This year, the company independently researched and developed AXdual, a double-mesh progressive heating ceramic core, and COTTONX with 360-degree all-round oil feeding, it achieved a new level in the field of atomization.

Chen Ping, CEO of HCD injection tramadol 100mg

Chen Ping said, “We should know well and?stay ahead of the market , constantly innovate and update our products iteratively. In the future, we will continue to speed up R&D and launch more high-quality products that meet the new national standards. I don’t like to give up. I like to explore new tech in a deeper level, just like walking through a maze. It’s a very interesting?process and full of challenge .?”

As we all know, tobacco flavor has the characteristics of relatively large e-liquid molecules and slow fluidity. Therefore, the atomization core with strong permeability is needed, which does not leak e-liquid and can well restore the tobacco flavor. It makes the selection of atomization core is particularly important. The traditional cotton core have the phenomena of oil leakage, low stability and easy charred; Screen-printed ceramic core also have some disadvantages, such as weak stability, uneven heating, and easy to break the heating line at high temperature. These are not the best choice for tobacco-flavored e-cigarette.

?

Double-mesh heating&graded temperature control, more efficient,?accurate and controllable e-liquid?guided, smoke volume increased by 50%

Secondly, the multi-layer temperature field gradually heats up, and the taste is improved by 100%. Significantly reduce the separation of ?atomizing-liquid?molecules, and improve the degree of taste reduction.

Avoid local high temperature and significantly reduce harmful substances. AXdual ceramic core can avoid the possibility of local high-temperature zone internal and surface of ceramic body to the greatest extent, and significantly reduce the formation of aldehyde harmful substances caused by thermal decomposition of carrier substances (PG and VG) of atomized liquid.

In addition, the advantages of AXdual ceramic core include high efficiency of double heating pieces, and reduction of carbon deposition and heavy metal release.?The heating efficiency of double heating sheet?is higher than single one. Under the same quantity?of smoke, the temperature of heating sheet?can be appropriately lowered to prolong the lifespan?of heater. Under the same?puffs, reduced?the carbon deposit, burnt taste?and?release of heavy metals.

At the same time, AXdu’s gradual heating can reduce excessive hot and cold shock and reduce the hidden trouble of ceramic powder dropping from the source.

In terms of atomization power, AXdual has double power, and high and low gears can be switched freely. It can switch freely between 5-10W high and low gear, with double power range and smooth atomization dynamic response.

It is worth mentioning that AXdual has set a new record for the thinnest ceramic core in the industry. It’s?smaller and thinner, and the thinnest ceramic thickness can reach 3.0mm, which is 31% thinner than before. It is suitable for smaller assembly space and thinner atomization equipment.

Finally, AXdual can accurately control the temperature and meet the new national standard. As a practitioner in the field of atomization, Chen Ping said that the company will resolutely implement the mandatory national standard of E-cigarette, carry out production activities according to law, and create high-quality products that meet the new national standard. All indicators of AXdual ceramic core this time meet the new national standard.

Today, Mr. Chen Ping, CEO of HCD, officially announced that HCD AXdual ——double-mesh?graded heating ceramic core was listed, it will help brand enterprises?of Electronic atomization?（E-atomization for short）?start a new era of?atomizing.

（AXdual Video）

Since Han?Li?brought e-cigarette into the public’s field of vision in 2003, it?has experienced 19 years of development history.?During?this process, Atomization?core, as?the core component of e-cigarette,?is constantly updated and iterated, and has experienced six generations of technological innovation:

· The first generation : glass fiber rope;

· The second generation: traditional cotton core;

· The third generation : cylindrical ceramic core;

· The fourth generation : film coated ceramic core;

· The fifth generation : steel?sheet?ceramic core;

· The sixth generation: AX big smoke mesh-core ceramics;

The innovation of six generations of atomization core technology has promoted the rapid development of e-cigarettes.

HCD, as the world’s leading provider of atomization technology solutions, has been engaged in research and development, production and sales of atomization core technology for thirteen years. In the past 13 years, HCD?has pioneered steel ceramic core and AX big smoke ceramic core, and shipped more than 10 billion atomization cores in total, becoming the leader in the field of atomization cores.

With the promulgation of?E-cigarette Management Measures, especially E-cigarette National Standard, HCD?has positively?embraced the policy and made efforts to research and develop products that meet the new national standard.

Through double-mesh?and graded heating, AXdual ceramic core solved the problems?of local high temperature, powder dropping, carbon deposition, heavy metal release, oil conduction and oil leakage of ceramic core to the maximum extent, and carried out eight key points?upgrades respectively.

Dual-mesh heating &

grading temperature control
Double-mesh heating&graded temperature control, more efficient, accurate and controllable e-liquid guided, smoke volume increased by 50%.

Multi-layer temperature field gradual heating:

the taste is upgraded by 100%

Multi-layer temperature field progressive heating

Significantly reduce the separation of atomizing-liquid molecules.

Improve the taste reduction degree.

Avoid high local temperature.?

Significantly reduce harmful substances diazepam 5 mg rectal tube

Avoid the possibility of local high-temperature zones internal and surface of the ceramic body to the greatest extent, and significantly reduce the formation of aldehyde harmful substances caused by thermal decomposition of carrier substances (PG and VG) of atomized liquid.

High efficiency of double heating sheet:

reducing carbon deposition and heavy metal release.

The heating efficiency of double heating sheet?is higher than single one. Under the same quantity?of smoke, the temperature of heating sheet?can be appropriately lowered to prolong the lifespan of heater. Under the same puffs,reduced?the carbon deposit, burnt taste?and?release of heavy metals.

Progressive heating: reducing ceramic powder dropping

Progressive heating, reducing?excessive hot & cold shock?and the hidden trouble of ceramic powder dropping from the source

Double power:

free switching?between?high and low gear

It can switch freely between 5-10W high and low gear, with double power range and smooth atomization dynamic response.

Thinnest ceramic?core in industry,

Smaller and thinner

The thinnest ceramic can be 3.0mm,?which is 31% thinner than before. It is the thinnest ceramic core in the industry at present, and?suitable for smaller assembly space and thinner atomization equipment.

Accurate temperature control,

meet the new national standard

HCD officially released AXdual dual-mesh?graded heating ceramic core: the smoke volume increased by 50%, and faster?oil guiding efficiency. AXdual had eight key improvements, which solved the problems?such as powder dropping, carbon deposition and oil leakage of ceramic core etc.

（Patent screenshot）

Electric heating atomization technology is a new one emerging in recent years, which is applied to medical treatment, intelligent home appliances?and consumer electronics products?etc, among which?used to?the atomization device in the e-cigarette industry is particularly extensive. In order to solve the problems of initial small quantity?of smoke, insufficient oil supply or burn core, the existing technology is to enlarge micro-pores or reduce heat, but the above two ways?still have the disadvantages of oil leakage and insufficient atomizing.

（Patent structure diagram）

This patented invention of HCD?has broken the?shortcomings?of?traditional technical .?According to the patent specification, aiming at the defects of the prior art, the invention provides a heating mechanism and an atomizing device for graded heating, which can avoid or reduce the problem of small amount of initial working smoke without enlarging micro-pores or reducing heat, and achieve uniform atomization effect.

（Patent structure diagram）

From some exposed pictures, we can find that this product is a double mesh sheet. The obvious beneficial effect of this invention is that the heating circuit is provided with a preheating part and an atomizing part. The preheating?part preheats the liquid-guide?part?and e-liquid?first, which reduces the kinematic viscosity of the e-liquid?in the liquid guide part and improves the fluidity, so that the e-liquid?can quickly reach the atomizing surface from the liquid-inlet part.

As we all know, the compulsory national standard for e-cigarettes was officially announced recently, and it will be implemented on October 1st, which means that the industry has stricter access principles, and the research and development of high-quality products that meet the national standard has also become the key point?of the development of the industry. As of press time, HCD has not publicized this patent yet.

HCD?is the global?leading provider of atomizing?technology solutions, with more than 100 patents, and its products and service customers have spread to more than 100 countries and regions around the world. clomid 40 mg

Testing project?include 14 items:

01、Anti-filling;

02、Leakage-proof；

03、Activate protection;

04、Atomization area temperature;

05、Waterproof;

06、Safety of pressure relief;

07、Falling strength;

08、Atomized nicotine;

09、Atomizing impurities and pollutants;

10、Release amount of nicotine compounds in the release;

11、Release amount of carbonyl compounds in the release;

12、Heavy metal migration in ceramic atomization core；

13、2,3- dimethylpyrazine and other 82 kinds of aerosol additives;

14、Heating；

On the number of samples submitted for testing, there are quantity regulations for different product categories.

· E-cigarette Rod

Provide at least 12 e-cigarette rods and?suitable cartridges, 3 samples each for pressure relief safety and atomizing?area temperature.

· E-cigarette releases

Provide at least 18 e-cigarette rods?and suitable cartridges?(at least 18 suitable?cigarettes?are provided for e-cigarettes using e-liquid; E-cigarettes using solid aerosol, it should provide at least 72 suitable?cartridges).

· E-cigaretteatomizing substance

Each?suitable cartridge?shall?meet the requirement?of?at least?38 grams of aerosol.

· Ceramic atomization core

Provide at least 6 samples of ceramic atomization core (if applicable).

Then, as the core accessory of e-cigarette, how can atomization core meet the new national standard?

Take the HCD AXdual?(double-mesh?graded

ceramic core)?as an example, let’s?shows you

the new national standard simulation ativan sublingual 1mg lorazepam

test of precise temperature control

and dry burning prevention.

The draft puts forward that e-cigarette products should be registered by the department of tobacco monopoly administration before they are listed and sold in China, and those who meet the requirements are allowed to register and be included in the catalogue of e-cigarette products. The?establishment of e-cigarette production enterprises, e-cigarette processing enterprises, e-cigarette brand holding enterprises and e-cigarette nicotine production enterprises must be approved by the Department of Tobacco Monopoly Administration of the State Council, obtain a license for tobacco monopoly production enterprises, and be approved and registered by the market supervision and management department. E-cigarette production enterprises, e-cigarette processing enterprises and e-cigarette nicotine production enterprises must obtain the approval of the Department of Tobacco Monopoly Administration of the State Council for construction or technical transformation to expand production capacity. Engaged in e-cigarette retail business, it shall apply to the?Department of Tobacco Monopoly Administration?for obtaining a tobacco monopoly retail license or changing the scope of the license.

According to the National Tobacco Monopoly Bureau’s “public consultation draft, which will be implemented in 3-5 months after its issue”, the national standard of electronic cigarettes will be implemented in May 2022.

Due to the regulation of nicotine, the whole e-cigarette industry enterprises are making directional adjustments according to compliance?over the interim period. According to the market feedback, some powerful?brand enterprises are more active in conforming the new policies and taking compliance production and operation; Some brand enterprises turn their sales targets to overseas?market; However, most small and medium-sized brand enterprises are confused and struggling, gradually turning to herbal atomization, nicotine-free atomization and even medical atomization. Therefore, many brand enterprises are making herbal atomization products, which has formed?a new trend in e-cigarette industry.

Under the circumstances of this new upsurge and the development trend, HCD, which has been focusing on the research and development and production of atomization core for 13 years, actually started to lay out and develop the atomization core dedicated to herbal atomization liquid early. Half a year ago, HCD has already started the research on herbal atomization liquid : how to make a special atomization core for herbal atomization liquid, and make the natural herbal atomization liquid atomize into a natural, pure and fragrant taste at a suitable temperature and porosity? HCD?R&D team?found a unique formula and unique sintering process suitable for herbal atomization liquid?after thousands of scientific research and experiments. Finally, an atomization core for highly reducing herbal atomization liquid, YX herbal atomization core, was successfully developed, which made its debut at the IECIE exhibition on December 6-8, and ushered in an upsurge of industry attention.

According to the charger of R&D team, YX herbal atomization core combines the biological characteristics of herbal atomization liquid, adopts micro-molecule atomization technology?and?a unique scientific formula, through?a sintering process combining high temperature with constant temperature, refers to the atomization principle of “l(fā)ow-temperature atomization and natural reduction”,?finally achieves success through the atomization taste?test of hundreds of different herbal atomization liquids.YX?herbal atomization core, which is specially used for herbal atomization liquid, has been tested?that has a higher atomization reduction degree, delicate, soft and fragrant taste?compared with other atomization core. The heating sheet adopts the original patented technology of inlaid steel sheet, therefore?the taste is stable and enduring.